# Noise through ten resonances Pink noise excites the Siegfried EQ. Playing its bands exposes resonant regions inside a continuous source. ## Start here Lower the monitoring level before patching. These are documented patch designs, not claims of hardware audition. Unless this recipe uses the right Mix Pro for control voltage: center its DC offset, zero unused channels, and bring up only the cabled audio inputs. Connect Audio Interface MIX OUT to your normal monitoring chain. 1. Start all EQ bands low, FEEDBACK at minimum, and input 1 level modest. 2. Raise two or three separated bands, such as 115 Hz, 777 Hz and 2.8 kHz. ## Cables 1. Dual GTO PINK → Siegfried VC ResEQ IN 1. 2. Siegfried VC ResEQ OUT → Edelweiss right Mix Pro IN 1. 3. Edelweiss right Mix Pro OUT → Audio Interface AUX IN. ## Listen for A colored wind or vowel-like drone. It has no discrete melody or automatic rhythm. ## Play it Trade level between adjacent bands, keeping the total output roughly steady. ## If it misbehaves If only hiss remains, reduce the input and emphasize fewer bands; if it howls, lower FEEDBACK.